ACPI-0562: *** Warning: Type override - [SB__] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0562: *** Warning: Type override - [PM__] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0562: *** Warning: Type override - [SIO_] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0562: *** Warning: Type override - [PM__] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0562: *** Warning: Type override - [BIOS] had invalid type (Integer) for Scope operator, changed to (Scope) ACPI-0562: *** Warning: Type override - [CMOS] had invalid type (Integer) for Scope operator, changed to (Scope) ACPI-0562: *** Warning: Type override - [KBC_] had invalid type (Integer) for Scope operator, changed to (Scope) ACPI-0562: *** Warning: Type override - [OEM_] had invalid type (Integer) for Scope operator, changed to (Scope) ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: System [ACPI] (supports S0 S5) ACPI: PCI Root Bridge [NRTH] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 00:0f.1 ACPI: PCI Interrupt Routing Table [\_SB_.NRTH._PRT] ACPI: PCI _CRS 1 overrides _BBN 0 ACPI: PCI Root Bridge [PCI1] (00:01) PCI: Probing PCI hardware (bus 01) ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT] ACPI: PCI _CRS 2 overrides _BBN 0 ACPI: PCI Root Bridge [PCI2] (00:02) PCI: Probing PCI hardware (bus 02) ACPI: PCI Interrupt Routing Table [\_SB_.PCI2._PRT] ACPI: PCI Interrupt Link [LN00] (IRQs 3 4 5 7 9 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN01] (IRQs 3 4 5 7 9 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN02] (IRQs 3 4 5 7 9 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN03] (IRQs 3 4 5 7 9 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN04] (IRQs 3 4 5 7 9 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN05] (IRQs 3 4 *5 7 9 11 12 14 15) ACPI: PCI Interrupt Link [LN06] (IRQs 3 4 5 7 *9 11 12 14 15) ACPI: PCI Interrupt Link [LN07] (IRQs 3 4 5 7 9 *11 12 14 15) ACPI: PCI Interrupt Link [LN08] (IRQs 3 4 5 7 9 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN09] (IRQs 3 4 5 7 9 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN10] (IRQs 3 4 5 7 9 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN11] (IRQs 3 4 5 7 9 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN12] (IRQs 3 4 5 7 9 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN13] (IRQs 3 4 5 7 9 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN14] (IRQs 3 4 5 7 9 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN15] (IRQs 3 4 5 7 9 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN16] (IRQs 3 4 5 7 9 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN17] (IRQs 3 4 5 7 9 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN18] (IRQs 3 4 5 7 9 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN19] (IRQs 3 4 5 7 9 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN20] (IRQs 3 4 5 7 9 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN21] (IRQs 3 4 5 7 9 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN22] (IRQs 3 4 5 7 9 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN23] (IRQs 3 4 5 7 9 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN24] (IRQs 3 4 5 7 9 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN25] (IRQs 3 4 5 7 9 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN26] (IRQs 3 4 5 7 9 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN27] (IRQs 3 4 5 7 9 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN28] (IRQs 3 4 5 7 9 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN29] (IRQs 3 4 5 7 9 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN30] (IRQs 3 4 5 7 9 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN31] (IRQs 3 4 5 7 9 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNUS] (IRQs *10) PCI: Probing PCI hardware ACPI: PCI Interrupt Link [LNUS] enabled at IRQ 10 00:00:0f[A] -> 8-10 -> IRQ 10 level low 00:00:04[A] -> 9-0 -> IRQ 16 level low 00:00:05[A] -> 9-7 -> IRQ 23 level low 00:00:03[A] -> 9-1 -> IRQ 17 level low 00:00:03[B] -> 9-2 -> IRQ 18 level low 00:01:03[A] -> 9-3 -> IRQ 19 level low 00:01:03[B] -> 9-4 -> IRQ 20 level low 00:02:00[A] -> 9-5 -> IRQ 21 level low 00:02:00[B] -> 9-6 -> IRQ 22 level low number of MP IRQ sources: 15. number of IO-APIC #8 registers: 16. number of IO-APIC #9 registers: 16. number of IO-APIC #10 registers: 16. testing the IO APIC....................... IO APIC #8...... .... register #00: 08000000 ....... : physical APIC id: 08 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 08000000 ....... : arbitration: 08 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 000 00 1 0 0 0 0 0 0 00 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 0 1 0 1 0 1 1 71 0a 001 01 1 1 0 1 0 1 1 79 0b 001 01 0 0 0 0 0 1 1 81 0c 001 01 0 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 IO APIC #9...... .... register #00: 09000000 ....... : physical APIC id: 09 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 09000000 ....... : arbitration: 09 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 001 01 1 1 0 1 0 1 1 A9 01 001 01 1 1 0 1 0 1 1 B9 02 001 01 1 1 0 1 0 1 1 C1 03 001 01 1 1 0 1 0 1 1 C9 04 001 01 1 1 0 1 0 1 1 D1 05 001 01 1 1 0 1 0 1 1 D9 06 001 01 1 1 0 1 0 1 1 E1 07 001 01 1 1 0 1 0 1 1 B1 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 IO APIC #10...... .... register #00: 0A000000 ....... : physical APIC id: 0A ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 0A000000 ....... : arbitration: 0A .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 2 01 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 069 09 1 0 0 0 0 1 2 70 0a 088 08 1 0 0 0 0 0 2 80 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 1:0 IRQ17 -> 1:1 IRQ18 -> 1:2 IRQ19 -> 1:3 IRQ20 -> 1:4 IRQ21 -> 1:5 IRQ22 -> 1:6 IRQ23 -> 1:7 .................................... done. PCI: Using ACPI for IRQ routing isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Disk quotas vdquot_6.5.1 vesafb: framebuffer at 0xfd000000, mapped to 0xe081f000, size 3072k vesafb: mode is 1024x768x16, linelength=2048, pages=4 vesafb: protected mode interface info at c000:4a88 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SiI680: IDE controller at PCI slot 00:05.0 SiI680: chipset revision 2 SiI680: BASE CLOCK == 133 SiI680: 100% native mode on irq 23 ide0: MMIO-DMA , BIOS settings: hda:pio, hdb:pio ide1: MMIO-DMA , BIOS settings: hdc:pio, hdd:pio SvrWks CSB6: IDE controller at PCI slot 00:0f.1 SvrWks CSB6: chipset revision 160 SvrWks CSB6: not 100% native mode: will probe irqs later ide2: BM-DMA at 0xffa0-0xffa7, BIOS settings: hde:DMA, hdf:pio ide3: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdg:DMA, hdh:pio hda: IC35L120AVV207-0, ATA DISK drive blk: queue c03661a0, I/O limit 4095Mb (mask 0xffffffff) hdc: IC35L120AVV207-0, ATA DISK drive blk: queue c036660c, I/O limit 4095Mb (mask 0xffffffff) hde: IC35L120AVV207-0, ATA DISK drive blk: queue c0366a78, I/O limit 4095Mb (mask 0xffffffff) hdg: IC35L120AVV207-0, ATA DISK drive blk: queue c0366ee4, I/O limit 4095Mb (mask 0xffffffff) ide0 at 0xe0b20c80-0xe0b20c87,0xe0b20c8a on irq 23 ide1 at 0xe0b20cc0-0xe0b20cc7,0xe0b20cca on irq 23 ide2 at 0x1f0-0x1f7,0x3f6 on irq 14 ide3 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 241254720 sectors (123522 MB) w/1821KiB Cache, CHS=15017/255/63, UDMA(100) hdc: attached ide-disk driver. hdc: host protected area => 1 hdc: 241254720 sectors (123522 MB) w/1821KiB Cache, CHS=15017/255/63, UDMA(100) hde: attached ide-disk driver. hde: host protected area => 1 hde: 241254720 sectors (123522 MB) w/1821KiB Cache, CHS=15017/255/63, UDMA(100) hdg: attached ide-disk driver. hdg: host protected area => 1 hdg: 241254720 sectors (123522 MB) w/1821KiB Cache, CHS=15017/255/63, UDMA(100) Partition check: hda: hda1 hda2 hda3 < hda5 hda6 > hda4 hdc: hdc1 hdc2 hdc3 < hdc5 hdc6 > hdc4 hde: hde1 hde2 hde3 < hde5 hde6 > hde4 hdg: hdg1 hdg1: ide: late registration of driver. SCSI subsystem driver Revision: 1.00 libata version 1.02 loaded. kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 784k freed EXT2-fs warning: checktime reached, running e2fsck is recommended VFS: Mounted root (ext2 filesystem). scsi0 : SCSI host adapter emulation for IDE ATAPI devices NCR53c406a: no available ports found aec671x_detect: scsi: Detection failed (no card) GDT: Storage RAID Controller Driver. Version: 2.05 GDT: Found 0 PCI Storage RAID Controllers megaraid: v1.18k (Release Date: Thu Aug 28 10:05:11 EDT 2003) megaraid: no BIOS enabled. DC390: 0 adapters found Failed initialization of WD-7000 SCSI card! Guestimating sector 241231784 for superblock Guestimating sector 241231784 for superblock Guestimating sector 241231784 for superblock Guestimating sector 241231784 for superblock driver for Silicon Image(tm) Medley(tm) hardware version 0.0.1: No raid array found Medley RAID: No usable RAID sets found Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 00:50:50 Aug 9 2004 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usb-ohci.c: USB OHCI at membase 0xe0b41000, IRQ 10 usb-ohci.c: usb-00:0f.2, ServerWorks CSB6 OHCI USB Controller usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 4 ports detected Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. hub.c: new USB device 00:0f.2-1, assigned address 2 scsi2 : SCSI emulation for USB Mass Storage devices Vendor: SONY Model: CD-ROM CDU5211 Rev: YYS7 Type: CD-ROM ANSI SCSI revision: 02 Attached scsi CD-ROM sr0 at scsi2, channel 0, id 0, lun 0 sr0: scsi-1 drive Uniform CD-ROM driver Revision: 3.12 WARNING: USB Mass Storage data integrity not assured USB Mass Storage device found at 2 blk: queue c03661a0, I/O limit 4095Mb (mask 0xffffffff) blk: queue c036660c, I/O limit 4095Mb (mask 0xffffffff) blk: queue c0366a78, I/O limit 4095Mb (mask 0xffffffff) blk: queue c0366ee4, I/O limit 4095Mb (mask 0xffffffff) ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A cloop: Initializing cloop v2.01 cloop: loaded (max 8 devices) cloop: /cdrom/KNOPPIX/KNOPPIX: 30428 blocks, 65536 bytes/block, largest block is 65552 bytes. ISO 9660 Extensions: RRIP_1991A Freeing unused kernel memory: 144k freed Real Time Clock Driver v1.10f ACPI: Power Button (CM) [PWRB] ACPI: Processor [CPU0] (supports C1) Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] Intel ISA PCIC probe: not found. Databook TCIC-2 PCMCIA probe: not found. usb-uhci.c: $Revision: 1.275 $ time 00:50:50 Aug 9 2004 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usbdevfs: remount parameter error Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A tg3.c:v3.8 (July 14, 2004) eth0: Tigon3 [partno(BCM95704A6) rev 2002 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:c0:b6:06:1b:41 eth0: HostTXDS[1] RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[0] eth1: Tigon3 [partno(BCM95704A6) rev 2002 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:c0:b6:06:1b:40 eth1: HostTXDS[1] RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[0] tg3: eth1: Link is up at 100 Mbps, full duplex. tg3: eth1: Flow control is on for TX and on for RX. tg3: eth1: Link is up at 100 Mbps, full duplex. tg3: eth1: Flow control is on for TX and on for RX.