Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-STABLE #0: Mon Nov 7 23:25:15 EST 2005 root@cerberus.--------.com.au:/usr/obj/usr/src/sys/CERBERUS Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff807ac000. Preloaded elf obj module "/boot/kernel/geom_mirror.ko" at 0xffffffff807ac1f8. module_register: module g_mirror already exists! Module g_mirror failed to register: 17 Calibrating clock(s) ... i8254 clock: 1193189 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2411122542 Hz CPU: AMD Opteron(tm) Processor 250 (2411.12-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0xf5a Stepping = 10 Features=0x78bfbff AMD Features=0xe0500800 L1 2MB data TLB: 8 entries, fully associative L1 2MB instruction TLB: 8 entries, fully associative L1 4KB data TLB: 32 entries, fully associative L1 4KB instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 2MB unified TLB: 0 entries, disabled/not present L2 4KB data TLB: 512 entries, 4-way associative L2 4KB instruction TLB: 512 entries, 4-way associative L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative real memory = 3488743424 (3327 MB) Physical memory chunk(s): 0x0000000000001000 - 0x0000000000090fff, 589824 bytes (144 pages) 0x00000000008a9000 - 0x00000000c9d66fff, 3377192960 bytes (824510 pages) avail memory = 3366965248 (3210 MB) ACPI APIC Table: APIC ID: physical 0, logical 0:0 APIC ID: physical 1, logical 0:1 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 ioapic0: intpin 0 -> ExtINT (edge, high) ioapic0: intpin 1 -> ISA IRQ 1 (edge, high) ioapic0: intpin 2 -> ISA IRQ 2 (edge, high) ioapic0: intpin 3 -> ISA IRQ 3 (edge, high) ioapic0: intpin 4 -> ISA IRQ 4 (edge, high) ioapic0: intpin 5 -> ISA IRQ 5 (edge, high) ioapic0: intpin 6 -> ISA IRQ 6 (edge, high) ioapic0: intpin 7 -> ISA IRQ 7 (edge, high) ioapic0: intpin 8 -> ISA IRQ 8 (edge, high) ioapic0: intpin 9 -> ISA IRQ 9 (edge, high) ioapic0: intpin 10 -> ISA IRQ 10 (edge, high) ioapic0: intpin 11 -> ISA IRQ 11 (edge, high) ioapic0: intpin 12 -> ISA IRQ 12 (edge, high) ioapic0: intpin 13 -> ISA IRQ 13 (edge, high) ioapic0: intpin 14 -> ISA IRQ 14 (edge, high) ioapic0: intpin 15 -> ISA IRQ 15 (edge, high) ioapic0: intpin 16 -> PCI IRQ 16 (level, low) ioapic0: intpin 17 -> PCI IRQ 17 (level, low) ioapic0: intpin 18 -> PCI IRQ 18 (level, low) ioapic0: intpin 19 -> PCI IRQ 19 (level, low) ioapic0: intpin 20 -> PCI IRQ 20 (level, low) ioapic0: intpin 21 -> PCI IRQ 21 (level, low) ioapic0: intpin 22 -> PCI IRQ 22 (level, low) ioapic0: intpin 23 -> PCI IRQ 23 (level, low) MADT: Found IO APIC ID 3, Interrupt 24 at 0xdf200000 ioapic1: intpin 0 -> PCI IRQ 24 (level, low) ioapic1: intpin 1 -> PCI IRQ 25 (level, low) ioapic1: intpin 2 -> PCI IRQ 26 (level, low) ioapic1: intpin 3 -> PCI IRQ 27 (level, low) MADT: Found IO APIC ID 4, Interrupt 28 at 0xdf201000 ioapic2: intpin 0 -> PCI IRQ 28 (level, low) ioapic2: intpin 1 -> PCI IRQ 29 (level, low) ioapic2: intpin 2 -> PCI IRQ 30 (level, low) ioapic2: intpin 3 -> PCI IRQ 31 (level, low) MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: low lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high ioapic0 irqs 0-23 on motherboard ioapic1 irqs 24-27 on motherboard ioapic2 irqs 28-31 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00040010 LDR: 0x01000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000 mem: null: random: nfslock: pseudo-device io: acpi0: on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x80003060 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=058000] [hdr=00] is there (id=005e10de) acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 1 func 0 acpi0: Power Button (fixed) acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 1 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 24 func 1 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 24 func 1 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 1 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 1 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 1 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 1 func 1 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 1 func 1 pci_link0: irq 0 on acpi0 pci_link0: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 16 17 18 19 pci_link0: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 16 17 18 19 pci_link0: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 16 17 18 19 pci_link1: irq 0 on acpi0 pci_link1: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 16 17 18 19 pci_link1: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 16 17 18 19 pci_link1: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 16 17 18 19 pci_link2: irq 0 on acpi0 pci_link2: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 16 17 18 19 pci_link2: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 16 17 18 19 pci_link2: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 16 17 18 19 pci_link3: irq 0 on acpi0 pci_link3: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 16 17 18 19 pci_link3: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 16 17 18 19 pci_link3: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 16 17 18 19 pci_link4: irq 0 on acpi0 pci_link4: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 16 17 18 19 pci_link4: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 16 17 18 19 pci_link4: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 16 17 18 19 pci_link5: irq 0 on acpi0 pci_link5: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 pci_link5: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 pci_link5: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 pci_link6: irq 0 on acpi0 pci_link6: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 pci_link6: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 pci_link6: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 pci_link7: irq 0 on acpi0 pci_link7: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 pci_link7: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 pci_link7: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 pci_link8: irq 0 on acpi0 pci_link8: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 pci_link8: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 pci_link8: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 pci_link9: irq 0 on acpi0 pci_link9: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 pci_link9: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 pci_link9: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 pci_link10: irq 0 on acpi0 pci_link10: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 pci_link10: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 pci_link10: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 pci_link11: irq 0 on acpi0 pci_link11: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 pci_link11: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 pci_link11: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 pci_link12: irq 0 on acpi0 pci_link12: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 pci_link12: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 pci_link12: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 pci_link13: irq 0 on acpi0 pci_link13: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 pci_link13: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 pci_link13: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 pci_link14: irq 0 on acpi0 pci_link14: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 pci_link14: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 pci_link14: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 ACPI timer: 1/2 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 cpu0: on acpi0 cpu1: on acpi0 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x10de, dev=0x005e, revid=0xa3 bus=0, slot=0, func=0 class=05-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x0051, revid=0xa3 bus=0, slot=1, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 00008c00, size 10, enabled found-> vendor=0x10de, dev=0x0052, revid=0xa2 bus=0, slot=1, func=1 class=0c-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00000000, size 5, enabled map[20]: type 4, range 32, base 00005000, size 6, enabled map[24]: type 4, range 32, base 00005040, size 6, enabled found-> vendor=0x10de, dev=0x005a, revid=0xa2 bus=0, slot=2, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base dd000000, size 12, enabled pcib0: matched entry for 0.2.INTA (src \\_SB_.PCI0.LUS0:0) pci_link6: Picked IRQ 20 with weight 0 ioapic0: Changing polarity for pin 20 to high pcib0: slot 2 INTA routed to irq 20 via \\_SB_.PCI0.LUS0 found-> vendor=0x10de, dev=0x005b, revid=0xa3 bus=0, slot=2, func=1 class=0c-03-20, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base dd001000, size 8, enabled pcib0: matched entry for 0.2.INTB (src \\_SB_.PCI0.LUS2:0) pci_link7: Picked IRQ 21 with weight 0 ioapic0: Changing polarity for pin 21 to high pcib0: slot 2 INTB routed to irq 21 via \\_SB_.PCI0.LUS2 found-> vendor=0x10de, dev=0x0053, revid=0xa2 bus=0, slot=6, func=0 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 00001400, size 4, enabled found-> vendor=0x10de, dev=0x0054, revid=0xa3 bus=0, slot=7, func=0 class=01-01-85, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00001440, size 3, enabled map[14]: type 4, range 32, base 00001434, size 2, enabled map[18]: type 4, range 32, base 00001438, size 3, enabled map[1c]: type 4, range 32, base 00001430, size 2, enabled map[20]: type 4, range 32, base 00001410, size 4, enabled map[24]: type 1, range 32, base dd002000, size 12, enabled pcib0: matched entry for 0.7.INTA (src \\_SB_.PCI0.LTID:0) pci_link12: Picked IRQ 22 with weight 0 ioapic0: Changing polarity for pin 22 to high pcib0: slot 7 INTA routed to irq 22 via \\_SB_.PCI0.LTID found-> vendor=0x10de, dev=0x0055, revid=0xa3 bus=0, slot=8, func=0 class=01-01-85, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00001458, size 3, enabled map[14]: type 4, range 32, base 0000144c, size 2, enabled map[18]: type 4, range 32, base 00001450, size 3, enabled map[1c]: type 4, range 32, base 00001448, size 2, enabled map[20]: type 4, range 32, base 00001420, size 4, enabled map[24]: type 1, range 32, base dd003000, size 12, enabled pcib0: matched entry for 0.8.INTA (src \\_SB_.PCI0.LSI1:0) pci_link13: Picked IRQ 23 with weight 0 ioapic0: Changing polarity for pin 23 to high pcib0: slot 8 INTA routed to irq 23 via \\_SB_.PCI0.LSI1 found-> vendor=0x10de, dev=0x005c, revid=0xa2 bus=0, slot=9, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x02 (500 ns) found-> vendor=0x10de, dev=0x005d, revid=0xa3 bus=0, slot=14, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1100, revid=0x00 bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1101, revid=0x00 bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1102, revid=0x00 bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1103, revid=0x00 bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1100, revid=0x00 bus=0, slot=25, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1101, revid=0x00 bus=0, slot=25, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1102, revid=0x00 bus=0, slot=25, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1103, revid=0x00 bus=0, slot=25, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pci0: at device 0.0 (no driver attached) isab0: at device 1.0 on pci0 isa0: on isab0 pci0: at device 1.1 (no driver attached) ohci0: mem 0xdd000000-0xdd000fff irq 20 at device 2.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdd000000 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: on ohci0 usb0: USB revision 1.0 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 10 ports with 10 removable, self powered ehci0: mem 0xdd001000-0xdd0010ff irq 21 at device 2.1 on pci0 ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xdd001000 ehci0: [GIANT-LOCKED] usb1: EHCI version 1.0 usb1: companion controller, 4 ports each: usb0 usb1: on ehci0 usb1: USB revision 2.0 uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub1: 10 ports with 10 removable, self powered atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1400-0x140f at device 6.0 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1400 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=60 ostat1=70 ata0: stat0=0x20 err=0x20 lsb=0x20 msb=0x20 ata0: stat1=0x30 err=0x30 lsb=0x30 msb=0x30 ata0: reset tp2 stat0=20 stat1=30 devices=0x0 ata0: [MPSAFE] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x01 lsb=0x7f msb=0x7f ata1: reset tp2 stat0=10 stat1=00 devices=0x4 ata1: [MPSAFE] atapci1: port 0x1440-0x1447,0x1434-0x1437,0x1438-0x143f,0x1430-0x1433,0x1410-0x141f mem 0xdd002000-0xdd002fff irq 22 at device 7.0 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1410 atapci1: [MPSAFE] atapci1: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xdd002000 atapci1: [MPSAFE] ata2: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1440 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x1434 ata2: SATA connect ready time=0ms ata2: sata_connect devices=0x1 ata2: [MPSAFE] ata3: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x1438 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x1430 ata3: SATA connect ready time=0ms ata3: sata_connect devices=0x1 ata3: [MPSAFE] atapci2: port 0x1458-0x145f,0x144c-0x144f,0x1450-0x1457,0x1448-0x144b,0x1420-0x142f mem 0xdd003000-0xdd003fff irq 23 at device 8.0 on pci0 atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1420 atapci2: [MPSAFE] atapci2: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xdd003000 atapci2: [MPSAFE] ata4: on atapci2 atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1458 atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0x144c ata4: SATA connect ready time=0ms ata4: sata_connect devices=0x1 ata4: [MPSAFE] ata5: on atapci2 atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0x1450 atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0x1448 ata5: SATA connect ready time=0ms ata5: sata_connect devices=0x1 ata5: [MPSAFE] pcib1: at device 9.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x2000-0x2fff pcib1: memory decode 0xdd100000-0xdeffffff pcib1: prefetched decode 0xfff00000-0xfffff ACPI: Found matching pin for 0.7.INTA at func 0: 22 pci_link2: BIOS IRQ 22 for 0.7.INTA is invalid pci1: on pcib1 pci1: physical bus=1 found-> vendor=0x1002, dev=0x4752, revid=0x27 bus=1, slot=7, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base de000000, size 24, enabled pcib1: (null) requested memory range 0xde000000-0xdeffffff: good map[14]: type 4, range 32, base 00002000, size 8, enabled pcib1: (null) requested I/O range 0x2000-0x20ff: in range map[18]: type 1, range 32, base dd100000, size 12, enabled pcib1: (null) requested memory range 0xdd100000-0xdd100fff: good pcib1: matched entry for 1.7.INTA (src \\_SB_.PCI0.LNK3:0) pci_link2: Picked IRQ 16 with weight 0 ioapic0: Changing polarity for pin 16 to high pcib1: slot 7 INTA routed to irq 16 via \\_SB_.PCI0.LNK3 pci1: at device 7.0 (no driver attached) pcib2: at device 14.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xf000-0xfff pcib2: memory decode 0xfff00000-0xfffff pcib2: prefetched decode 0xfff00000-0xfffff pci2: on pcib2 pci2: physical bus=2 pcib3: port 0xcf8-0xcff on acpi0 pcib3: could not get PCI interrupt routing table for \\_SB_.PCI2 - AE_NOT_FOUND pci8: on pcib3 pci8: physical bus=8 found-> vendor=0x1022, dev=0x7450, revid=0x12 bus=8, slot=10, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0117, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x7451, revid=0x01 bus=8, slot=10, func=1 class=08-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 64, base df200000, size 12, enabled found-> vendor=0x1022, dev=0x7450, revid=0x12 bus=8, slot=11, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0117, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x7451, revid=0x01 bus=8, slot=11, func=1 class=08-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 64, base df201000, size 12, enabled pcib4: at device 10.0 on pci8 pcib4: secondary bus 9 pcib4: subordinate bus 9 pcib4: I/O decode 0xf000-0xfff pcib4: memory decode 0xfff00000-0xfffff pcib4: prefetched decode 0xfff00000-0xfffff pci9: on pcib4 pci9: physical bus=9 pci8: at device 10.1 (no driver attached) pcib5: at device 11.0 on pci8 pcib5: secondary bus 10 pcib5: subordinate bus 10 pcib5: I/O decode 0xf000-0xfff pcib5: memory decode 0xdf300000-0xdf3fffff pcib5: prefetched decode 0xfff00000-0xfffff pci10: on pcib5 pci10: physical bus=10 found-> vendor=0x14e4, dev=0x1648, revid=0x03 bus=10, slot=9, func=0 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0116, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) intpin=a, irq=12 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type 1, range 64, base df310000, size 16, enabled pcib5: (null) requested memory range 0xdf310000-0xdf31ffff: good map[18]: type 1, range 64, base df300000, size 16, enabled pcib5: (null) requested memory range 0xdf300000-0xdf30ffff: good pcib5: matched entry for 10.9.INTA pcib5: slot 9 INTA hardwired to IRQ 28 found-> vendor=0x14e4, dev=0x1648, revid=0x03 bus=10, slot=9, func=1 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0116, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type 1, range 64, base df330000, size 16, enabled pcib5: (null) requested memory range 0xdf330000-0xdf33ffff: good map[18]: type 1, range 64, base df320000, size 16, enabled pcib5: (null) requested memory range 0xdf320000-0xdf32ffff: good pcib5: matched entry for 10.9.INTB pcib5: slot 9 INTB hardwired to IRQ 29 bge0: mem 0xdf310000-0xdf31ffff,0xdf300000-0xdf30ffff irq 28 at device 9.0 on pci10 bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xdf310000 miibus0: on bge0 brgphy0: on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: bpf attached bge0: Ethernet address: 00:e0:81:2f:25:94 bge0: [MPSAFE] bge1: mem 0xdf330000-0xdf33ffff,0xdf320000-0xdf32ffff irq 29 at device 9.1 on pci10 bge1: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xdf330000 miibus1: on bge1 brgphy1: on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge1: bpf attached bge1: Ethernet address: 00:e0:81:2f:25:95 bge1: [MPSAFE] pci8: at device 11.1 (no driver attached) psmcpnp0: irq 12 on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: current command byte:0067 psm0: failed to reset the aux device. sio0: irq maps: 0x1c01 0x1c11 0x1c01 0x1c01 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: irq maps: 0x1c01 0x1c09 0x1c01 0x1c01 sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 80 fdc0: [MPSAFE] fdc0: [FAST] atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff,0xc9800-0xcafff on isa0 ppc0 failed to probe at irq 7 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 212327 -> 100000 linprocfs registered procfs registered lapic: Divisor 2, Frequency 100463130 hz Timecounter "TSC" frequency 2411122542 Hz quality -100 Timecounters tick every 2.000 msec Linux ELF exec handler installed DUMMYNET with IPv6 initialized (040826) lo0: bpf attached ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default The GEOM class MIRROR is already loaded. ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire acd0: setting PIO4 on nVidia nForce4 chip acd0: setting UDMA33 on nVidia nForce4 chip acd0: CDROM drive at ata1 as master acd0: read 4133KB/s (4133KB/s), 128KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, packet acd0: Writes: acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad4: 238475MB at ata2-master SATA150 ad4: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad4 ad4: nVidia check1 failed ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed GEOM_MIRROR: Device gm0s1 created (id=2319345939). GEOM_MIRROR: Device gm0s1: provider ad4s1 detected. ad4: LSI (v2) check1 failed ad4: FreeBSD check1 failed GEOM_MIRROR: Device mirror_data created (id=3614183067). GEOM_MIRROR: Device mirror_data: provider ad4s2 detected. ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad6: 238475MB at ata3-master SATA150 ad6: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad6 ad6: nVidia check1 failed ad6: Adaptec check1 failed ad6: LSI (v3) check1 failed ad6: LSI (v2) check1 failed GEOM_MIRROR: Device mirror_swap created (id=4021051102). GEOM_MIRROR: Device mirror_swap: provider ad6s1 detected. ad6: FreeBSD check1 failed ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad8: 238475MB at ata4-master SATA150 ad8: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue ad8: nVidia check1 failed ad8: Adaptec check1 failed ad8: LSI (v3) check1 failed ad8: LSI (v2) check1 failed ad8: FreeBSD check1 failed ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad10: 238475MB at ata5-master SATA150 ad10: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM_MIRROR: Device mirror_usr created (id=114603973). GEOM_MIRROR: Device mirror_usr: provider ad6s2 detected. GEOM: new disk ad8 GEOM: new disk ad10 ad10: nVidia check1 failed ad10: Adaptec check1 failed ad10: LSI (v3) check1 failed ad10: LSI (v2) check1 failed ad10: FreeBSD check1 failed ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00040010 LDR: 0x02000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000 ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0 ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0 ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0 ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0 ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0 ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0 ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0 ioapic0: routing intpin 20 (PCI IRQ 20) to cluster 0 ioapic0: routing intpin 21 (PCI IRQ 21) to cluster 0 ioapic0: routing intpin 22 (PCI IRQ 22) to cluster 0 ioapic0: routing intpin 23 (PCI IRQ 23) to cluster 0 ioapic2: routing intpin 0 (PCI IRQ 28) to cluster 0 ioapic2: routing intpin 1 (PCI IRQ 29) to cluster 0 GEOM_MIRROR: Device gm0s1: provider ad8s1 detected. GEOM_MIRROR: Device gm0s1: provider ad8s1 activated. GEOM_MIRROR: Device gm0s1: provider ad4s1 activated. GEOM_MIRROR: Device gm0s1: provider mirror/gm0s1 launched. GEOM_MIRROR: Device mirror_data: provider ad8s2 detected. GEOM_MIRROR: Device mirror_data: provider ad8s2 activated. GEOM_MIRROR: Device mirror_data: provider mirror/mirror_data launched. GEOM_MIRROR: Device mirror_data: rebuilding provider ad4s2. GEOM_MIRROR: Device mirror_swap: provider ad10s1 detected. GEOM_MIRROR: Device mirror_swap: provider ad10s1 activated. GEOM_MIRROR: Device mirror_swap: provider ad6s1 activated. GEOM_MIRROR: Device mirror_swap: provider mirror/mirror_swap launched. GEOM_MIRROR: Device mirror_usr: provider ad10s2 detected. GEOM_MIRROR: Device mirror_usr: provider ad10s2 activated. GEOM_MIRROR: Device mirror_usr: provider mirror/mirror_usr launched. GEOM_MIRROR: Device mirror_usr: rebuilding provider ad6s2. Trying to mount root from ufs:/dev/mirror/gm0s1a start_init: trying /sbin/init Loading configuration files. No suitable dump device was found. Entropy harvesting: interrupts ethernet point_to_point kickstart . swapon: adding /dev/mirror/mirror_swap as swap device Starting file system checks: /dev/mirror/gm0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/mirror/gm0s1a: clean, 326260 free (428 frags, 40729 blocks, 0.1% fragmentation) /dev/mirror/mirror_usr: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/mirror/mirror_usr: clean, 105858898 free (47074 frags, 13226478 blocks, 0.0% fragmentation) /dev/mirror/gm0s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/mirror/gm0s1d: clean, 1012932 free (60 frags, 126609 blocks, 0.0% fragmentation) /dev/mirror/gm0s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/mirror/gm0s1e: clean, 3671128 free (320 frags, 458851 blocks, 0.0% fragmentation) /dev/mirror/mirror_data: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/mirror/mirror_data: clean, 50030290 free (274 frags, 6253752 blocks, 0.0% fragmentation) Setting hostname: cerberus.--------.com.au. lo0: flags=8049 mtu 16384 inet 127.0.0.1 netmask 0xff000000 bge0: flags=8843 mtu 1500 options=1a inet 10.168.100.25 netmask 0xfffff800 broadcast 10.168.103.255 ether 00:e0:81:2f:25:94 media: Ethernet autoselect (none) status: no carrier Starting divert daemons: Flushed all rules. 00100 allow ip from any to any via lo0 00200 deny ip from any to 127.0.0.0/8 00300 deny ip from 127.0.0.0/8 to any 65000 allow ip from any to any Firewall rules loaded . Firewall logging enabled net.inet.ip.fw.enable: 1 -> 1 add net default: gateway 10.168.96.1 Additional routing options: . Starting devd. hw.acpi.cpu.cx_lowest: C1 -> C1 Mounting NFS file systems: . Creating and/or trimming log files: . Starting syslogd. /etc/rc: WARNING: Dump device does not exist. Savecore not run. Setting date via ntp. bge0: link state changed to UP 9 Nov 13:08:55 ntpdate[362]: step time server 203.109.252.7 offset -3.575342 sec Starting rpcbind. Nov 9 13:08:55 cerberus rpcbind: cannot create socket for udp6 NFS access cache time=2 Starting amd. ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib /usr/local/lib/compat/pkg Starting usbd. Starting local daemons: . Updating motd . Configuring syscons: blanktime . Starting sshd. Initial amd64 initialization: . Additional ABI support: . Starting cron. Local package initialization: could not start postmaster Starting apache2. Starting snmpd. . Additional TCP options: . Starting background file system checks in 60 seconds. Wed Nov 9 13:10:03 EST 2005